Setting up HPE System Manager on Linux
Ensure the following packages are installed:
net-snmp hponcfg-4.5.0-0.x86_64 hpsmh-7.5.0-4.x86_64 hpssacli-2.20-11.0.x86_64 hpdiags-10.34.1914-1896.x86_64 hpsum-7.2.1-6.rhel6.x86_64 hp-snmp-agents-10.20-2789.26.rhel6.x86_64 hp-ams-2.2.0-1688.44.rhel6.x86_64 hp-smh-templates-10.2.0-1429.26.noarch hp-health-10.20-1723.28.rhel6.x86_64
(versions vary)
Set up /etc/snmp/snmpd.conf configuration as follows:
# First, map the community name "public" into a "security name" # sec.name source community com2sec localRO 127.0.0.1 public com2sec localRW 127.0.0.1 private com2sec hpsim_ro YOUR_IP public #### # Second, map the security name into a group name: # groupName securityModel securityName group group_localRO v1 localRO group group_localRO v2c localRO group group_localRW v1 localRW group group_localRW v2c localRW group group_hpsimro v1 hpsim_ro #### # Third, create a view for us to let the group have rights to: # Make at least snmpwalk -v 1 localhost -c public system fast again. # name incl/excl subtree mask(optional) view all included .1 #### # Finally, grant the group read-only access to the systemview view. # group context sec.model sec.level prefix read write notif access group_localRO "" any noauth exact all none none access group_localRW "" any noauth exact all all none access group_hpsimro "" any noauth exact all none none ## Extra's dlmod cmaX /usr/lib64/libcmaX64.so dontLogTCPWrappersConnects 1 trapcommunity public trapsink YOUR_IP public syscontact someone@localhost syslocation DATACENTER
Finally run /sbin/hpsnmpconfig and reply y to keep current config
Still stuck? Maybe we can help. Contact us at Upwork
Never miss a thing subscribe to our newsletter
or follow us on twitter
For more super cool techie stuff check out our blog!!
Recent Changes
Contribute to this wiki
Why not help others by sharing your knowledge? Contribute something to this wiki and
join out hall of fame!
Contact us for a user name and password