• nvram - change or display non-volatile RAM variables e.g.
nvram to display all settings 
nvram Autoload Y to change autoload parameter
  • xlv_mgr - manage and display XLV volumes, can be used in interactive mode, e.g.
xlv_mgr - takes you into interactive mode
xlv_mgr show all - displays current set up
xlv_mgr show object db1 - shows volume db1 details
xlv_mgr delete object db1- deletes volume db1
  • /etc/default/login - Controls direct root access. To change, uncomment CONSOLE and define where allowed to login straight as root
  • hinv - gives information about disks with SCSI ID and controller number
  • prtvtoc - disk details (what is on the disk) e.g.
 prtvtoc dkssndcnvh

where sn is the SCSI ID and cn is the controller number as shown in hinv Gives type i.e. xfs - logical volume (if no mount directory it isn't mounted!), raw - raw partition; volhdr header; volume whole volume; start address and size

  • swap -l - gives swap details. Part of this is the major and minor numbers. From this by doing ls -l /dev/dsk/dksndns* can tell where swap is allocated to
  • sysinfo - gives serial number for some servers (otherwise on back of box!)
  • osview - performance monitoring tool (GUI version called gr_osview)
  • chkconfig - reviewing the daemons that starts by runlevel (has been ported on some Linux flavors).


  • /etc/hosts - hosts/IP addresses
  • /etc/sys_id - hostname of server
  • /etc/config/netif.options - network card parameters . If these options are changed should execute /etc/autoconfig and reboot
  • /etc/config/ifconfig-1.options - controls netmask and settings used by ifconfig at startup (network scripts are /etc/init.d/network and /etc/init.d/network.local)
  • netstat -r - check router statements
  • ifconfig interface - check interface card up and configured
  • netstat -ina - check interface name

Assigning more IP addresses to a network card

 1. Edit /etc/config/ipaliases.option adding entries as required (network
    card name can be found from netstat -r, netmask and IP info from
 2. run chkconfig
 3.  - if ipaliases not shown do chkconfig -f iplaliases on
 4. run /etc/init.d/aliases_ip
 5. check with ifconfig

Xwindow Security

  • xhost - controls which displays can be brought up on which workstations. By itself with no options it displays current settings
  • xhost hostname - allow displays from hostname to come up on current workstation
  • xhost - hostname - remove permission

Recent Changes

Contribute to this wiki

Why not help others by sharing your knowledge? Contribute something to this wiki and join out hall of fame!
Contact us for a user name and password